Description
The P40 proximity reader offers both standard and open OSDP/Wiegand communication protocols between readers and access control units (LPU).
Its behaviour and its output format can be modified by encoding on the settings tool, then showing a configuration key/pass to the reader.
With its up-to-the-minute design, it can be easily integrated in your commercial and residential projects. In addition to Mifare® RFID technology, this key/pass reader offers the opportunity to work with Bluetooth virtual credentials.
Key characteristics
- High security and easy installation.
- Two protocols available: OSDP (transparent mode depending on the settings chosen) and Wiegand
- MIFARE® proximity reader
- All Mifare® (light and Desfire) can be read for an optional charge
- Secure Bluetooth read technology for access with virtual credentials
- Integrated LEDs
- Surface-mounted with terminal output – IP65 (provided installation instructions are complied with)
- Firmware updated online and remotely (OSDP according to integration level)
Power supply
The P40 RFID reader must be powered by the access control unit.
Communication
The proximity reader is connected via 4 wires (OSDP) and up to 8 wires (Wiegand).
In OSDP mode, communication is bidirectional and permanent with the access control LPU. The controller knows the status of the reader in real time.
Updating firmware
The P40 badge reader firmware can be updated via the access control software and depending on the level of OSDP mode integration.
Technical characteristics
Power supply
Operating voltage: 12V supplied by the controller
Outputs
- Wiegand outputs: Up to 8 wires (including the 2 power supply wires)
- OSDP output: 4 wires (including 2 power supply wires)
- Max. cable length: 100 m – 8/10 AWG20 // 1,000 m – 6/10 AWG24 RS485 (local power supply)
- Frequency: 13.56 MHz (MIFARE Classic®, MIFARE Plus® and DESFire) + Bluetooth Low Energy (BLE)
Read distance
- MIFARE Classic®: up to 40mm depending on the badge
- BLE : based on mode and settings
LEDs
- 3 colors
- Managed via the controller software
Temperature
- Operating temperature: -20°C to 60°C
- Storage temperature: -20°C to 70°C
- Humidity : 85 RH max.
Protection rating
- Protection rating: IK10
- Waterproof rating: IP65
Size
- Size (L x l x H): 90 mm x 47 mm x 23 mm
- Weight: 65g
